公司新聞

攤鋪機的日常檢查與保養

來源：http://lehuoaijia.com/ 日期：2023-05-26

攤鋪機是一種主要用于公路基層和面層各種材料攤鋪?zhàn)鳂I(yè)的施工設備，是由各種不同的系統相互配合完成攤鋪工作的，主要包含行走系統、液壓系統、輸分料系統等。下面濟南攤鋪機出租廠家來講講攤鋪機的日常檢查與保養事項。

Paver is a kind of construction equipment mainly used for paving various materials of road base and surface course, which is completed by various systems, mainly including walking system, hydraulic system, material conveying and distribution system, etc. Now let's talk about the daily inspection and maintenance of the paver from the paver rental manufacturer in Jinan.

(1）每天開機前要檢查三液（發動機油油位．防凍液液位以及液壓油液位），如有缺少的及時補充至正常指示刻度。

(1) Before starting the machine every day, check the three fluids (engine oil level, antifreeze level, and hydraulic oil level), and if there is any shortage, replenish it to the normal indicated scale in a timely manner.

(2）檢查分動箱、螺旋齒輪箱齒輪油油位，如有缺少的及時補充至正常指示刻度。

(2) Check the gear oil level of the transfer case and spiral gear case, and if there is any shortage, replenish it to the normal indicating scale in time.

(3）檢查攤鋪機各部件連接螺栓的緊固情況，特別是左右臺車架和機架、熨平板、擋料板、螺旋吊臂、刮料板輸送裝置的螺栓是否松動或斷裂，必要時予以緊固。

(3) Check the fastening of the connecting bolts of all parts of the paver, especially the bolts of the left and right carriages and frames, screeds, baffle plates, spiral booms, and scraper conveyor for looseness or breakage, and tighten them if necessary.

(4）檢查加熱系統的噴火頭、連接管、氣罐開關是否正常。

(4) Check whether the nozzle, connecting pipe, and gas tank switch of the heating system are normal.

(5）檢查自動潤滑裝置的潤滑脂是否夠用（2#鋰基脂）

(5) Check if the lubricating grease of the automatic lubrication device is sufficient (2 # lithium grease)

(6）檢查各電器插頭是否有松動脫落現象。

(6) Check whether the electrical plugs are loose or detached.

(7）檢查螺旋反向葉片是否磨損嚴重，必要時及時更換。

(7) Check if the spiral reverse blades are severely worn and replace them in a timely manner if necessary.
濟南攤鋪機出租

(8）啟動前檢查操作面板各個開關是否在停止位，各轉動部件之間有無干涉。

(8) Before starting, check whether the switches on the operation panel are in the stop position and whether there is any interference between the rotating components.

(9）每日工作結束后清潔攤鋪機，清除攤鋪機表面粘接和堆積的水穩料、瀝青料等，清除機器表面和液壓元件等部件表面上的塵土、油垢。

(9) Clean the paver at the end of daily work, remove the water stabilized material, asphalt, etc. adhered and accumulated on the surface of the paver, and remove the dust and oil dirt on the surface of the machine and hydraulic components and other parts.

此外要注意，攤鋪運轉過程中，注意有無異常聲響，攤鋪機的發動機、機械傳動系統、液壓系統無過熱現象，注意攤鋪機的作業行駛過程中有無打滑跑偏現象。更多相關事項就來我們網站http://lehuoaijia.com進行咨詢！

In addition, pay attention to whether there is abnormal sound during the paving operation, whether the engine, mechanical transmission system and hydraulic system of the paver are overheated, and whether the paver slips and deviates during operation. For more related matters, come to our website http://lehuoaijia.com Consulting!

上一條：不同壓路機在瀝青路面的應用

下一條：瀝青混凝土路面的碾壓分三個步驟進行